GPI A109GMN100NA1 1" Nylon Battery Powered Flow Meter
Please sign in so that we can notify you about a reply
The A1 Nylon Flow Meter line are used with water, mild-chemicals and other fluids. The lithium battery powered electronic display A1 Nylon flow meters are calibrated to read in gallons and liters per minute with two visible display totals in which case one is resettable and the other gives you a cumulative flow total. This one-inch model has a flow rate of 3 to 50 GPM.
This item is used and need to change the battery on the display
Box is not included
What you see is what you get
Design Type: Turbine
Housing Material: Nylon
Fitting Type: NPT
Turbine Size: 1 Inch
Flow Range: 3 to 50 GPM ; 11 to 190 LPM
Accuracy (% of Reading - Turbine with Computer): ± 1.5%
Repeatability: ± 0.2%
Pressure Rating: 150 psi ; 10.2 bar
Operating Temperature Range: -40 to 250 ºF ; -40 to 121 ºC
Operating Temperature Range with Computer: 0 to 140 ºF ;-18 to 60 ºC
Typical K-Factor: 730
Wetted Material Housing: Nylon
Wetted Material Bearings: Ceramic
Wetted Material Shaft: Tungsten Carbide
Wetted Material Rotor: Nylon
Wetted Material Rings: 316 Stainless Steel
Wetted Material Signal Generator: Ferrite
Frequency Range: 11 to 110 Hz at 0.3 to 3 GPM
Recommended Strainer Size: 28 mesh
Shipping Weight: 1.35 lbs ; 0.61 kg
Reads: Gallons ; Litres
Electronic Choice: 09 - 2 Totals (1 Resettable/ 1 Cumulative), Factory Calibration in Gallons and Litres, 2 User Calibrations and Flowrate
Power Supply Two Lithium Batteries
Manufacturer GPI
MPN A109GMN100NA1
Manufacturer Warranty 1 Year
Mitchell Catalog Number 9lmig2, 8rmig2, 7rmig2
Customer reviews
No reviews found